---------------------------- Release notes for Repute 2.0 ---------------------------- Š2002-17 Geocentrix Ltd. All rights reserved. "Geocentrix" and "Repute" are registered trademarks of Geocentrix Ltd. Last updated: 31/05/2017 Repute 2.0 (Update 22) ---------------------- Version 2.0.22.17050 Released 31/05/2017 Issues fixed (1 item): 2810 Prevent Repute 2.0 from deleting Repute 2.5 files in ProgramData folder Repute 2.0 (Update 21) ---------------------- Version 2.0.21.16060 Released 06/06/2016 Issues fixed (5 items): 2790 Report is missing input and output data from Boundary Element Analysis 2789 Report Designer does not appear when Modify Report button is pressed 2788 Boundary Element results are no longer saved even when Save Results flag is set 2787 Licence Registration Wizard does not clear IP address when Network Licence tickbox is unchecked 2786 Algorithm names are numbers instead of names in Property Inspector Repute 2.0 (Update 20) ---------------------- Version 2.0.20.16050 Released 26/05/2016 Issues fixed (4 items): 2768 "The signature of this program is corrupt or invalid" when downloading Repute2Setup.exe 2658 Update MJFreelancing's MJFAF library to v3.6.0.11 2494 Prevent Upgrade Wizard from writing Trial Licence to dongle 2416 Allow user to enter network IP address via Licence Registration Wizard Repute 2.0 (Update 19) ---------------------- Version 2.0.19.15110 Released 01/02/2016 Issues fixed (35 items): 2766 Boundary Element Analysis ignores surcharge applied to ground surface 2765 Combination of actions displays Fx = INF when surcharge is included 2764 Generated PGN file contains negative stiffness values 2761 Relax restriction on stiffness gradient for rock 2760 Allow micropiles with diameter less then 200 mm to be modelled 2758 'Standard production size' flag not set for standard Bearing Pile sections 2757 Add section properties for ArcelorMittal HZ sections 2756 Allow Randolph's calculations to be performed on piles other than Bored Piles 2754 Plan drawing of spun pile looks very strange 2752 Program produces cryptic warning message '497' 2751 Pile cap information is missing from the default report 2750 Cannot change number of elements per pile in boundary element analaysis 2749 Depth of pile toe is calculated incorrectly when the pile head is below ground surface 2747 Allow Fleming's calculation to be performed on all types Replacement Piles 2745 No need to copy universal PGroupN engine to working folder 2741 Program fails to detect piles extending beyond bottom of borehole 2740 Display pile toe location on pile group page of Workbook 2739 Increase limit on number of piles that can be analysed in a pile group from 200 to 350 2738 Remove degree of freedom limit from boundary element engine 2733 Prevent items being renamed in Workbook to same name as exisiting item 2707 Scale of load vs displacement graph goes awry after switching to another graph 2704 Number of pile elements must be >= 3 and <= 50. Value entered = 56 2703 An error occurred while reading data for 'Clay': Undrained strength depth increase of '' must be >= 1 m and <= +INF m. Value entered = 1 m 2702 Force cannot be applied at top of pile with large free-standing length 2682 Increase limit on free-standing length of pile to 35 m (from 20 m) 2679 Repute passes wrong information to PGroupN in presence of groundwater 2678 Increase limit on ground stiffness from 10% of concrete stiffness to 20% (i.e. Ep/Es > 5) 2667 Update copyright notice for 'XML format' in RPX files 2651 Add columns showing pile circumferences and base area to Longitudinal ULS results 2650 Units for limiting bearing pressure algorithm should default to MPa 2646 On opening file from Update 13/14, soil is missing if its small stain modulus equals its large stain value 2629 No warning given when deleting a material (e.g. concrete or steel) linked to a pile or pile group 2628 Boundary element results are not saved when Calculation has '/' in its name 2618 Improve feedback when default Nq value is used 2077 Duplicated items should be named 'Original name - copy' Repute 2.0 (Update 18) ---------------------- Version 2.0.18.14050 Released 13/06/2014 Issues fixed (8 items): 2602 Warning message 'Piles in a group must not be raked towards each other' is falsely triggered 2601 Cannot analyse an asymmetrically-raked pile under torsion 2594 Algorithms linked to layers have no effect in Longitudinal ULS Calculations 2590 Number of pile elements in Bouindary Element Analysis does not take into account plugging of H-pile 2589 Circumference is not given in Property Inspector for Sections 2588 Borehole and vertical rulers are misaligned vertically 2586 Algorithm names are missing from the Stockyard and replaced by numbers in Property Inspector 2585 Provide a Trial Edition that has not expired Repute 2.0 (Update 17) ---------------------- Version 2.0.17.14040 Released 17/04/2014 Issues fixed (1 items): 2585 Provide a Trial Edition that has not expired Repute 2.0 (Update 16) ---------------------- Version 2.0.16.14020 Released 10/04/2014 Issues fixed (52 items): 2583 Limit capabilities of Piglet Conversion Wizard in Trial Edition 2582 Several references are missing from the Reference Manual 2581 Increase the limit on pile stick-up to 20 m 2580 Check version number of imported Piglet file 2579 Access violation when changing Boundary Element stress-strain model to Linear Elastic 2578 Cannot select Combination of Actions by clicking on contained surcharge 2577 X and Y rakes are swapped on reading from Piglet XLS file 2576 Invalid operation in GDI+ (Code: 4) 2572 Program crashes when displaying the Property Inspector for a Boundary Element Analysis without an applied action 2571 Relax restriction on pile-to-pile spacing being S/D >= 2 2570 Yamashito layer modelling should be set when importing Piglet file with Gb set differently to Gs 2569 Add Rake Orientation to pile properties that are displayed in the Workbook 2568 Pile rakes are read as degrees (instead of radians) on conversion from Piglet file 2567 [Project] folder is stated to be in the wrong location in Quick-Start Guide 2563 Soil stiffness values are not displayed on Soil Report, even though they are set 2562 Update VCL controls to version 13.2.4 2561 Pile Group Wizard generates wrong x,y co-ordinates for 7 pile group 2560 Program crashes with assertion on opening RPX1 file 2556 Cannot select uniform surcharge on Drawing Board 2550 Improve display of end bearing on shear stress vs depth plot 2544 Reference Manual does not state default algorithm for Nq 2443 Reference Manual should specify how to calculate degrees of freedom 2437 Update XML library to v3.2.0.5 2431 Store results of Boundary element Analysis in folder 2407 Save results of Boundary Element Analysis in separeate sub-folder 2401 Provide access to Sentinel Admin Control Center from within the program's brower 2363 The number of scenarios that can be created in the Project Wizard is limited to 10 2328 Upgrade FastReport component to 4.14 (2013 release) 2316 Increase limit on depth of Shrinkage Algorithm 2304 Error 'Axis Maximum Value must be >= Minimum" when viewing 'Rotation thetaz' 2303 Tiny rotations and torsions should not be displayed on Graph Paper 2300 Error message "tr1:bad_weak_ptr" as I enter soil stiffness property 2285 Add explanation about treatment of Gibson and multi-layered soil profiles to the Reference Manual 2269 Selection rectangle for combination of actions is too large on plan 2224 Remove expiry date from Trial edition 2200 Provide an explanation of the Poulos and Yamashita layer averaging algorithms 2195 Sign convention and notation used in Chapter 2 of Reference Manual does not agree with Chapter 4 2094 Definitions of Sx, Sy, Sz and Thetax, Thetay, and Thetaz are not given in program documentation 2064 Allow rock unconfined strength to be used as (twice) undrained strength in ULS calculations 2052 Default wall friction is not documented for Longitudinal ULS calculation 2051 Change 'Is undrained' flag to Drained/Undrained radio buttons in Calculation Property Box 2047 Same hotkey (P) used twice in Licence Registration Wizard 1947 Inconsistent units used to display angles (mrad on Graph Paper, degrees in Workbook) 1921 Cannot set loads at the top of pile cap 1911 Error message should be generated when large strain stiffness value greater than small strain value is entered 1902 Cannot find the \TeeUser8.hlp Help file 1836 Significantly different results for Tutorial 1 than quoted in Quick Start Guide 1804 Add message when default parameters are used in a longitudinal ULS calculation 1647 Default name for Observation Point and Ordnance Datum needs to be changed 1477 Add ability to specify pile rake in a specific direction (rather than components of rake in X- and Y-directions) 1462 Piles are displayed in reverse order in report 1124 Add separate horizontal Young's modulus for concrete Repute 2.0 (Update 15) ---------------------- Version 2.0.15.14010 Released 23/01/2014 Issues fixed (34 items): 2557 Longitudinal ULS calculation does not use limiting skin friction or end bearing algorithms 2555 Give more specific version number for MJFAF XML library that the program is linked to 2554 Access violation if single pile missing from stage when running boundary element analysis 2553 Unexpected behaviour when borehole created with layer containing no soil 2552 All Stages in converted project are incorrectly linked to final Combination of Actions 2551 Show progress in status bar when opening large project files 2549 Single pile has no end bearing but its ultimate pile capacity is exceeded 2548 Progam incorrectly allows Professional Edition calculations to be run in the Standard Edition and vice versa 2547 Limits of skin friction and bearing pressure are not applied properly 2543 Program crashes when Chalk is added to undrained boundary element analysis in layer not marked as drained 2542 Error in specification of Tutorial 5 on p57 - second analysis is not performed 2541 Text about warning message in Tutorial 4 p50 no longer applies 2540 Screenshots for Tutorial 4 in Quick-Start Guide are wrong 2539 Results for Tutorial 5 in Quick-Start Guide are wrong 2538 Program should automatically show warning messages generated on opening an existing project 2535 Depth to rigid layer calculated incorrectly when no rigid layer is present (should be infinity) 2532 Repute installer on Geocentrix CD is not the advertised version 2521 Error message on program startup on Windows 7 32-bit machine: Wow64FsRedirection::Wow64FsRedirection 2474 Sloping ground has no effect on calcuations and should be disabled 2429 On page 63 of Quick-Start Guide, the layer thickness should read 35m not 25m 2428 Some soils are missing on re-opening a saved RPX file 2427 Text and picture listing algorithms is out of date 2426 Depth now appears under 'Location' not 'Dimensions' 2425 Ny no longer appears in the Property Inspector 2423 Error on page 25 of Tutoral 2 Step 3 2408 Print Preview of DrawingBoard is not scaled or centred properly 2405 Cannot paste item into Project manager after copying it 2390 Drawing Board plan plot shows cross-section instead 2351 Default folder used by Project Wizard should not be within the 'Program Files' folder on Windows 7 and later 2283 Typo on page 63 of Quick-Start Guide 1832 Introduction to Tutorial 5 wrongly refers to Step 2 of Tutorial 1 1785 Screenshots on pages 41 and 43 of Quick-start Tutorial are out-of-date 1784 Top screenshot on p42 of Quick-start Tutorial is out-of-date 1752 Errors in Tutorial 5 section of Quick-Start Tutorial Repute 2.0 (Update 14) ---------------------- Version 2.0.14.13080 Released 07/08/2013 Issues fixed (16 items): 2518 An error occurred while reading data for 'Rock': Unconfined strength of 'Soil 3' must be >= 0.1 MPa and <= 1000 MPa. Value entered = 0.03 MPa 2501 Program Options box appears split across multi-screen display 2485 Refresh button's background colour is pink instead of transparent 2475 'Refresh' button should be labelled 'Detect' in Upgrade Wizard 2451 Rename box appears split across multi-screen display 2449 Internal error: no inspector has been registered for 'Geocentrix::CustomUniformSurcharge' 2448 Pore water pressures incorrectly set to zero in all single pile calcualtions 2447 Default unconfined compressive strength of rock incorrectly set as 0.03 MPa 2446 An error occurred while reading data for 'Rock': Unconfined strength of 'Soil 2' must be >= 15 MPa and <= 750 MPa. Value entered = 0.03 MPa 2445 Access violation in module 'cxTreeListRS11.bpl' when opening RPX file containing rock 2444 Program ignores bearing pressure limit in Boundary Element Analysis when skin friction limit is not set (and vice versa) 2442 Es values adopted for some layers are not those entered 2441 Program does not read PGN files correctly 2440 Default pile interaction should be 'Unlimited' not 'Limited' 2414 Adobe PDF file 'Repute 2 Quick-Start Guide.pdf' not found at C:/Program Files (x86)/Geocentrix/Repute/2.0/Manuals/ 2412 Splash screen appears split across dual monitors at startup Repute 2.0 (Update 13) ---------------------- Version 2.0.13.13030 Released 02/04/2013 Issues fixed (12 items): 2439 'Use MAC address' box does not work in Licence Registration Wizard 2435 Beta algorithm ignored by Longitudinal ULS calculation 2434 Improve handling of PGN data (part of BoundaryElementAnalysis) 2422 Display full version number of installed PGroupN calculation engine 2421 Should not be able to set number of increments to one for non-linear Boundary Element Analysis 2420 Unrealistic tension in central piles of large group 2418 Rock unconfined strength is not saved to RPX file 2417 All rocks share same unconfined strength 2415 Include customer's licence details in RPX file 2413 Device drivers needed to communicate with the security key have not been installed on this computer 2378 Self-weight of pile cap is assumed to act at x= 0, y = 0 regardless of position of pile group 2372 Arrow of forces cannot be seen in plan view (hidden behind yellow background) Repute 2.0 (Update 12) ---------------------- Version 2.0.12.12110 Released 07/12/2012 Issues fixed (27 items): 2404 Access Violation in ReXML.dll when using Ctrl+C or Edit > Copy command 2402 Program crashes running Boundary Element Analysis on rock 2400 Program crashes when changing boundary element analysis when graph paper is displayed 2399 Sign of pile rake in YZ plane is wrong in generated PGN file 2398 Installation of device drivers adds considerable time to overall program installation 2396 'Cannot focus a disabled or invisible window' appears when opening Project Wizard 2395 Upgrade Developer Express controls to v12.1.6 (2012 release) 2394 Assertion failed: intf !=0, file ...\include\vcl\utilcls.h, line 2298 2392 Assertion failed: intf !=0, file C:\Program Files\CodeGear\RAD Studio\5.0\include\vcl\utilcls.h, line 2298 2391 Graph Paper printout has black background 2387 Some essential items are disabled in the Academic Edition 2384 Reporter does not display results of boundary element analysis (only input values) 2382 Change default folder used by Project Wizard to 'Desktop' 2381 'Cannot focus a disabled or invisible window' on opening Action or Project Wizards 2380 'src->QueryInterface(GetIID(), (LPVOID*)(&intf))': No such interface supported 2379 Heading appears as '1709' in Longitudinal ULS Property Inspector 2377 Omit XMLPartner dll from installation 2370 Rename category heading 'Action' to 'Components' in Property Inspector for Actions 2327 Upgrade Developer Express VCL controls to 2012.1.5 2326 Upgrade Steema TChart component to 9.0.7 (2012 release) 2312 Allow Sand to be classified as 'grSa' (gravelly SAND) 1945 Bad lexical cast when reading results from boundary element analysis 1898 Drawing is copied to Clipboard in Cross-Section orientation, even when Drawing Board is set to Plan or Elevation 1897 Drawing Board's Print Preview always shows the scenario in Cross-Section, even when set to Plan or Elevation 1803 Deleting bearing capacity algorithm from project does not delete it from Calculation 1577 Buttons on graph paper tab not working 1098 Change orientation of graph in graph toolbar print preview to portrait Repute 2.0 (Update 11) ---------------------- Version 2.0.11.12080 Released 18/09/2012 Issues fixed (15 items): 2376 Workbook status bar always displays '' even when an item is selected 2375 Message Board does not automatically show the last message received, without the user having to scroll the view 2374 Message Board does not automatically switch display from showing error messages if an information messages is generated 2365 Borehole wizard step 5: page over flows when more than 10 scenarios present 2364 The limit on number of layers that can be created in the Borehole Wizard is limited to 50 2361 Error message for limiting bearing pressure and skin friction is incorrect 2360 Heading 'option' is missing an 's' 2357 Some references are missing from Reference Manual 2354 Add support for Singapore NA to EN 1997-1 2253 Reference Manual does not explain purpose of pile property 'Anisotropy' 2155 Move project files to [Users > Public > Public Documents] > Geocentrix > Repute > 2.0 on Windows Vista/Windows 7 2025 Cannot change displayed data using Workbook tab's Boundary Element Analysis box 2005 Typesetting information refers to previous version of wordprocessor used to generate manuals 1414 About Box doesn't adopt selected skin 967 Messages not always in view - change order Repute 2.0 (Update 10) ---------------------- Version 2.0.10.12040 Released 10/05/2012 Issues fixed (17 items): 2341 Inspector for BearingCapacityAlgorithm should not show Ny for piles 2334 Concrete lost from project on opening RPX file 2331 Randolph Analysis gives very large displacmeent at pile head, but much smaller displacement at shallow depth 2330 Pile report shows no data for square piles 2323 Cannot re-open files created in previous version of Repute 2.0 if 'Save results' flag set for Boundary Element calculation 2322 Stiffness parameters are copied when duplicating clay 2321 An error occurred while reading data for 'BearingCapacityAlgorithm': Nc must be between 5.14 and 266. Value entered = 1 2320 Nc, Nq, and Ny values are reset to default when duplicating Bearing Capacity Algorithm 2319 Bearing Capacity Algorithm should not allow Nc = 1 even when Custom Option is chosen 2318 The rigid layer at 20 m is too close to the toe of the deepest pile at 18.5 m 2314 Borehole Wizard contains panels with grey (instead of transparent) backgrounds 2313 Property Inspector repeats 'Resistance factors' panel for Custom Working Stress Design Standard 2311 First page of Workbook Print Preview displays vertical line only 2309 Loading Repute...: Repute2.exe - Application Error 2306 An error occurred while reading data for 'PipeSection': EAccessViolation 2305 'Error loading XML document' when layer name includes ampersand '&' 2276 Pure virtual function called when opening Property Inspector for design standard Repute 2.0 (Update 9) --------------------- Version 2.0.9.11050 Released 04/11/2011 Issues fixed (65 items): 2299 Provide facility to change base diameters of piles in a group in one operation 2298 Pile undeream does not appear on Drawing Board 2297 Graphs of pile stresses should be drawn starting from the centre of Element 1, below ground (not Element 0, above ground) 2296 Algorithms do not appear in report 2294 Depth below ground shown as negative on Workbook's Boundary elements page 2293 Wizard generates wrong y position for Piles 1-2 and 4-5 in 5-pile group 2292 Wizard generates wrong y position for Piles 1-4 and 8-11 in 11-pile group 2291 Wizard generates wrong y position for Piles 1-3 and 8-10 in 10-pile group 2290 Wizard generates wrong y position for Piles 1-2 and 6-7 in 7-pile group 2288 Error message 'Pile shaft diameter ... Value entered = 1e+06 mm' when attempting to change diameter to 1000 mm 2287 Boundary element calculation is not aborted when rigid layer is too close to the pile toe 2286 Depth of pile toe is calculated incorrectly (sign is wrong) 2284 Cannot read heading text on report owing to dark background on Windows 7 2282 Non-linear boundary element analysis fails to model mid-layer water table properly 2281 Clay layers are treated as undrained in drained non-linear boundary element analysis 2280 Set default values for skin friction and bearing pressure limits to infinity in Boundary Element Analysis 2279 Boundary element analysis always models dry ground as below ground water level 2278 Strength of drained clay layers incorrectly modelled in boundary element analysis 2277 Cannot select a pile group on cross-section or elevation views 2274 Customize... button should be visible at all times 2272 Cannot import Piglet file containing undrained soil layer 2268 Allow pile cap to be rotated 2267 Display pile group centroid in group's Property Inspector 2266 Pile Group Wizard does not rotate the pile group despite angle of rotation being specified 2265 No message produced on Run Stage when no calculations are linked to stage 2264 Copyright notice on welcome page is out of date 2263 Add ability to install/re-install device drivers from within Repute 2262 passed invalid handle to function - status code 9 2259 Should not be able to set soil anisotropy to zero 2257 Allow program to model tubular concrete piles 2256 'Ultimate axial capacity of group exceeded' in Repute 2 for group that works in Repute 1.5 2255 Pile property inspector does not display torsional stiffness GJ 2254 Pile property inspector does not show updated EI and GJ values when anisotropy is changed from 1.0 2245 In boundary element analysis, automatic number of elements should also be the maximum number allowed 2244 Increase limit on custom wall friction from 35 degrees to cater for rock 2243 Error loading XML document when re-opening RPX file 2236 Improve layout of headings in Workbook pages 2235 Critical state cohesion for soil wrongly taken as peak cohesion on initialization 2234 Load vs displacement graph for Randolph Analysis shows no data 2230 'Expires' box is not empty on new installation 2228 Use different symbols to distinguish between settlements (s) and stresses (S) 2227 Limiting base pressure shown as 'INF' when it should have finite value 2225 The x,y coordinates of the calculated pile group centroid is missing from the output of results 2223 Controls are not resized to new panel size on Windows 7 64-bit 2220 Property Inspector allows a depth/level to be assigned to the ground surface 2219 Property Inspector allows a depth/level to be assigned to a borehole 2215 The notation Sxy for shear stress is misleading 2214 Stresses Sx, Sy etc are shown at element centre not at top in Workbook 2212 Pile-group stiffness coefficients in Workbook are different from those in corresponding Output.txt file produced by PGroupN 2211 Units of G, dG/dz, and mass density are missing from Soils report 2210 Soils report incorrectly labels dG/dz value as 'dE/dz' 2209 Wizards and dialog boxes have green background 2139 Provide facility to 'Upgrade From 1.5' 2033 Clarify meaning ot Sx etc and theta_x etc in Boundary Increment display 1986 Cannot link a Tubular Pile to a Custom Section 1908 PGroupN accepts only one value for lateral Young's modulus (insufficient for H-piles) 1879 Provide capability to import PGN files 1645 Duplicate controls for custom EC7 design standard 1508 Cannot select pile group by clicking on piles above ground surface 1433 Add design standard to cover Italian National Annex to Eurocode 7 1425 Force and moments should be drawn in front of the pile group, not behind 1417 Screenshot used in setup program is out of date 1360 Document name appears as 'Master' in Windows print queue 1332 Skins are not applied consistently across all dialog boxes 1121 Copy command on Message Board pop-up menu does not work Repute 2.0 (Update 8) --------------------- Version 2.0.8.11020 Released 19/04/2011 Issues fixed (59 items): 2207 Bearing capacity algorithm's Berezantzev option should not provide value for Nc 2204 Text background is not transparant on Finish page of Project Wizard 2202 Display torsional constant for sections in their Property Inspectors 2201 Display shear modulus of man-made materials in their Property Inspectors 2191 Selection handles are drawn in the wrong place for a raked pile 2189 This program expired on 2011-Feb-04 and will now automatically shut down 2188 Expiry message can be circumvented using Trial Edition 2183 Property Inspector for layers should not include boxes for active, passive, and at-rest coefficients 2182 Layers report does not include links to other items 2181 Make report template separate to that used by other Re/x programs 2179 Soils report displays values of shear modulus G but labels them 'E' 2168 Wrong units displayed in report of bored pile diameter 2167 Pile shaft diameter must be >= 0.2 m and <= 3.5 m. Value entered = 220 000 mm 2166 Piles saved with diameter < 300 mm are lost on re-opening project file 2165 Typo: it should read "Geotechnical" not "Geotechnial" 2163 Partial factors on pile resistance for BS EN 1997-1 are incorrectly reported as 1.0 2160 Alow pile rake to be entered as value plus (plan) orientation 2159 ULS calculation should prevent raked piles from being specified 2158 Longitudinal ULS calculation does not work properly under tension loading 2135 Remove Pipe sections from Pro Edition, since Tubular Piles are not supported 2128 Hot keys for some buttons on Build tab are not set properly 2127 Hot keys for Ribbon tabs (Y1-Y8) are not intuitive to remember 2126 Program should prevent or warn when RPX projects from newer updates are read 2120 Tubular Pile property inspector does not display pile diameter or thickness 2119 Pile shaft diameter must be >= 0.3 m and <= 3 m. Value entered = 508000 mm 2118 Tubular pile registers no base load at failure 2116 Warning message reads '416798670', should read 'Using default value for Nq =...' 2115 Information message reads '1432', should read 'Maximum bearing pressure is...' 2107 Remove NO_STRICT define from all project files 2106 Mass of pipe sections is given as kg/m^2 instead of kg/m inx XML data files 2105 x,y coordinates of pile toe are calculated incorrectly when pile is raked 2103 Re-order release notes so 'New in this release' preceeds 'Revision history' 2099 Change Repute setup icon to differentiate it from the Repute program 2098 Change Sentinel HASP installation from silent to visible mode 2097 Error searching for expression 'LateralEarthPressureCoefficient.custom_kc/@value' 2096 Update value in RPX file is incorrectly recorded as '2.0.6' instead of '2.0.7' 2095 Units for rotation are given as degrees in Boundary Increment sheet, but as radians everywhere else 2093 Units for Force vs Rotation Stiffness are given incorrectly as GNm/m (should be GN/rad) 2092 Units for Moment vs Rotation Stiffness are given incorrectly as GNm (should be GNm/rad) 2088 Credit screen (from AboutBox) displays wrong version number for PGroupN 2087 Make Atkins logo larger in start up screen and About Box (to match other logos) 2078 Disallow entry of very small actions (e.g. 1x10-14 kN) 2046 Improve presentation of link between partial factors and design situation 2045 Add support for Italian Design Standard (D.M. 14/01/2008) 1977 Error message '88' when the connected security key contains a different licence to the one registered 1961 Warning message reads '416798658' under Windows 7, should read 'Using default value for Nq =...' 1888 Messages do not appear in Message Board until it is clicked on (on Windows 7) 1823 Upgrade Developer Express components to version 53 1733 Non-linear parameters are missing from Report of Boundary Element calculation 1727 Soil stiffness, interface friction, and earth pressure coefficients are not available in the calculation report 1716 Update Steema TChart Component from v8.04 to v2010 1643 Poor error message for invalid base stiffness Eb for Fleming's analysis 1641 Property Inspector for custom EC7 standard duplicates controls for factors on actions and material properties 1607 Add an algorithm to control plugging assumptions 1546 Data missing from Boundary Element Report 1460 Data is missing from report of boundary element settings 1361 Repute icon appears over-large on print thumbnails 1322 Shortcut keys (e.g. Ctrl+Del to delete) do not work in the Project Manager 1113 No shortcut keyboard keys work - eg: Ctrl + D for duplicate Repute 2.0 (Update 7) --------------------- Version 2.0.7.10100 Released 04/11/2010 Issues fixed (28 items): 2086 Changes to licence details are not saved when running under Windows 7 with Standard User permissions 2085 Nothing is written to program log when running under Windows 7 with Standard User permissions 2084 Changes to program options are not saved when running under Windows 7 with Standard User permissions 2081 Prevent rigid layer being placed too close to base of longest pile 2075 Provide intermediate PGroupN engine sizes at 1000, 3000, and 5000 degrees of freedom 2074 Automatically expand error messages when added to MessageBoard 2072 PGroupN.exe does not stop executing until end of increment when error occurs 2071 Error 22013 2070 Default units for base and shaft diameters should be mm 2069 List index out of bounds (0) 2068 Program crashes when analysing pile group which has no self-weight 2067 Spelling mistake on load vs displacement graph 2065 Display circumference in section properties 2063 Abnormal program termination when running calculation 2054 Shaft diameter of Augered Pile appears as '-' on Workbook's Pile Group page 2049 Report does not indicate whether calculation is drained or undrained 2048 Undrained strength parameters and stiffnesses are missing from soils report 2034 Access violation when dropping layer onto borehole that already contains that layer 2029 Add ability to set limit of 5000kPa to the end bearing in a Longitudinal ULS calculation 2028 Internal Error: no XML writer has been registered for 'Geocentrix::BearingPressureLimit' 2018 Allow limit to be specified for pile/soil interface stresses in single-pile ULS calculations 2012 Cannot enter threshold values for shaft and base resistance 1981 Error "Cannot create file 'C:\ProgramData\Geocentrix\Repute\MRU.ini' Access is denied" on opening Repute when logged into Windows 7 via Standard account 1931 Important soil properties (undrained strength, Young's modulus, etc.) are not included in the printed report 1822 Strange output when pile spacing to diameter ratio is 1.456 1813 A change to a soil's 'reference depth' appears to make no difference to calculations 1649 Wrong error message when entering invalid (negative) depth for Standing Water Table 1267 Add option to disable (deactivate) a pile or line of piles in a group Repute 2.0 (Update 6) --------------------- Version 2.0.6.10064 Released 26/07/2010 Issues fixed (59 items): 2022 The standing water table '' is below formation level 2021 Negative gradient appears as INF in Property Inspector 2015 Pile cap thickness set to 0.5m (was 1.0m) on re-opening RPX file 2013 'My' moments are drawn in the wrong position in Cross Section view 2011 Shrinkage algorithm doesn't affect skin friction generated in granular soils 2009 Units are repeated in headings for Randolph Analysis results 2006 Add Corus Celcius range of circular hollow sections to library 2004 Results of Randolph's Analaysis are all -1 2003 Default weight density of concrete should be 25 kN/m3 according to Eurocode 1 2002 Dimensions of bearing piles should be displayed in mm not m 2000 Element is not allowed under element 1998 Access violation on duplicating a Tubular Pile that has no section linked to it 1997 Pipe piles do not appear in the Stockyard 1994 An error occurred while reading data for 'TubularPile': EAccessViolation 1989 Cannot re-open saved filter unless a filter is currently in operation 1988 Assertion failed px != 0 when dragging layer or soil onto Drawing Board of scenario without Borehole 1985 Message 'Depth increase must be >=1 and <= +inf. Value entered = 0' when setting Reference Depth for soil 1982 Tubular piles imported from Repute 1.x are analysed incorrectly in Repute 2 boundary element analysis 1974 tag should be optional in Algorithm schema 1973 Invalid window handle running boundary element analysis 1972 Tiny values for moment in Combination of Actions causes PGroupN to hang 1971 Pile's X-gradient does not change when pile's rake is changed 1970 'update' attribute in Repute's RPX format is not recognised by online schema 1969 Program does not save results of boundary element analysis 1968 Francesco Basile's name is mispelt in Reference Manual 1966 Custom Bearing Capacity Algorithm should enforce Nc >= pi + 2 1963 Option does not change to 'Custom' when value for Nq entered into Bearing Capacity Algorithm 1962 Remove repeated message from Message Board 1960 Add ability to specify concrete for pile cap and work out self-weight 1959 Remove grey colour from piles when no material is linked 1957 Construction Sequence item is redundant 1955 Default factors for Custom Eurocode 7 are strange 1953 References are incomplete on page 49 of Reference Manual 1952 Expressions for resultant forces in a combination of actions are wrong in Reference Manual p27 1951 Label used for Step 3 of Pile Group Wizard is wrong 1948 Program Options box displays blank page for Project > Units category 1941 Horizontal forces are wrongly assumed to act through centre of pile group in boundary element analysis 1937 Poisson's ratio changed silently on converting Drained Layer from Repute 1 to Granular Soil 1936 Party has no name after converting from RPX1 file 1935 'Not specified' label appears on Drawing Board (plus error box appears on mouse over) 1934 Cannot assign Custom Section to Tubular Pile 1933 Standing water should not be allowed at ground surface 1929 Boundary elements tab fails to populate 1928 Add visual indication of direction of x,y,z axes according to drawing orientation 1914 Calculate self-weight of pile cap and allow inclusion in action applied to group 1913 Add minimum cover and auto resize properties to pile group 1874 Cannot re-run boundary element analysis after changing combination of action applied to pile group 1843 The are no pipe sections available to select as tubular pile section 1788 Access violation in module 'Boreholes.dll' when calculating Randolph (1992) example 1773 Option to save results on closing project (from Repute 1.5) is missing 1747 Program fails to account for the depth of the action applied in a Boundary Element Analysis 1688 Allow previous calculation results to be reloaded into the program 1687 Results missing from Workbook on re-running calculation 1681 Assertion failed in RandolphAnalysis.cpp on line 571 1678 Circular and rectangular sections are missing their circumference, section modulus, and interia properties 1620 Graph Paper context menu buttons Select/Deselect All should read Show All/Show None 1487 Weight density of Grade C30/37 concrete is not 24 or 25 kN/m3 as per EN 1992 1454 Add pile numbers to plan view of Drawing Board 1453 Provide explanation of methods used to calculate capacity etc in the program documentation Repute 2.0 (Update 5) --------------------- Version 2.0.5.10032 Released 30/03/2010 Issues fixed (32 items): 1923 Failed to load XML file when validating boundary element analysis 1920 Cannot set undrained soil strength data for Custom Cohesive Soil in Borehole Wizard 1918 'Not licensed for commercial use' appears on printout of Drawing Board 1917 Schedule calculation command should be disabled if the calculation is currently scheduled 1916 Re-run calculation command should be disabled if the calculation has not already been run 1910 Moments should not produce resultant forces in combinations of actions 1907 RPX file does not record which version of Repute it was saved by 1906 Order of items in RPX file differs each time it is saved 1904 'Failed to load data from XML file ...' after running boundary element analysis 1903 Open command on App menu does not display File Open box (blank error message generated) 1901 Large moments are reduced by a factor of 1000 on re-opening project file 1899 Increase the maximum diameter of bored piles to 5m (currently 3m) 1894 Implement boundary element analysis for non-circular piles 1893 Boundary element analysis fails to run but no error message is produced 1890 Graph truncates moment My values at 1400 and -2200KNm 1889 Error searching file '.rpx' for expression: '/Repute/Document' 1887 Program fails to handle attempt to open a ZIP file 1878 'Cleanup Program Data' command does not remove 'Repute 2' folder 1877 Move strings for graph paper into RexUI.dll 1876 Inconsistent headings in Workbook 1875 Extend program data cleanup to include 'Repute 2' folder 1872 Improve rock descriptions and strength values to be consistent with EN ISO 14689 1859 Provide more variety in default colouring of lines when results for multiple piles are displayed 1847 Access violation building calculation after deleting calculation with same name 1812 Cannot enter realistic drained strength properties for rock 1783 Show time remaining to completion of calculation in PGroupN console window 1701 Wrong error message for weight density of Concretes in Property Inspector 1700 Wrong error message for weight density of Steels in Property Inspector 1588 Not all cohesive soils appear in the table in stage 4 1579 Cannot print Message Board: 'There are no pages to display' 1519 Reports.dll has unwanted dependency on Piles.dll 1096 Welcome page is printed instead of graph from graph's popup menu Report command Repute 2.0 (Update 4) --------------------- Version 2.0.4.10010 Released 19/02/2010 Issues fixed (25 items): 1873 River soil state uses rock instead of soil descriptions 1871 Database values of undrained strength are not totally consistent with EN ISO 14688 1868 Drawing doesn't update when different stage is selected in Project Manager 1862 Direction of horizontal force does not change when sign of force changes in the x-direction 1857 Message "Berezantzev's bearing coefficients are for deep foundations only" when generating report 1855 Weight density of Soil 2 is out of range (for dry sand) in Step 3 of Tutorial 4 1853 Access violation in kernel32.dll after clicking on borehole 1852 Version number written to RPX file does not include update version (e.g. 2.0, not 2.0.3) 1851 Visual Fortran run-time error when running boundary element analysis on single pile 1850 No error message generated when pile cap is below ground level 1849 Warning 'No design standard has been specified' even though it has 1844 Increase allowable pile free-standing length from 3m to more than 6.5m 1842 Access violation dragging item from Stockyard onto Drawing Board when no scenario is selected 1840 Need to clarify sign convention and axis orientation (since it differs from Repute 1.x) 1839 Repute does not login to Licence Manager as Program 3 1838 Program does not retain login to Network Licence Manager 1835 boost::filesystem error on startup 1834 Sign of Theta X and Theta Y is wrong in Workbook 1833 Sign of Mx and Mx is different on output in Workbook than entered via Property Inspector 1830 Setup program creates redundant 'Repute 2' folder under Documents and Settings 1825 Copyright notice on welcome page is out-of-date 1711 Hyperbolic torsion factor is not passed to boundary element engine 1651 On validating dry and wet soil mass density, error message gives values of weight density 1639 Critical error when negative value entered into ready reckoner 1442 Layers and water tables do not appear in reports Repute 2.0 (Update 3) --------------------- Version 2.0.3.9120 Released 11/01/2010 Issues fixed (32 items): 1821 Panels do not realign on opening existing project 1820 Elapsed time reported by PGroupN console underestimates actual time taken to perform calculations 1818 Interpile spacing < 2.5 should issue warning not critical error 1817 PGroupN console reports wrong information in 'Program took' line 1816 Provide better filter in Registration box to prevent invalid licence number being entered 1815 Add green skin under visual appearance 1814 Labels used on F vs depth graphs do not correspond to pile names 1810 Panels do not resize properly after switching desktop 1809 Borehole does not draw correctly 1807 Remove WARNING from About Box: 'no liability is accepted for use of this pre-release software' 1806 Add controls to allow a specific (single) calculation to be run 1805 Build current scenario buttons should be disabled when there are no scenarios or calculations specified 1802 Selection handles for bored pile appear in the wrong place 1800 Update Developer Express controls to Build 47 1799 Order of x, y, and depth parameters pasased to water tables and surcharges is wrong 1797 Remove redundant references from Reference Manual 1796 Corrections needed to Reference Manual 1789 Error 'boost::filesystem::remove' running boundary element analysis 1760 Borehole with multiple layers draws all layers with symbol for top layer only 1755 Screenshot of About box is out-of-date in help system 1754 Screenshot of Repute 2 UI is out-of-date in help system 1730 Cannot get output from Boundary Element Analysis 1723 No results are generated for second Boundary Element calculation in project 1708 Screenshot of About box in help file is out of date 1670 Model factor on resistance is missing from workbook display of Longitudinal ULS results 1669 Inconsistent labelling of symbols in Workbook headings 1619 In the Graph Paper context menu the Save As button is always greyed out 1515 Program does not remember 'Active Load Case' from Repute 1.5 1459 Draw bending moment graphs with data points shown 1456 Bending moment graphs do not specify which moment is shown 1449 Drawing jumps in position on switching from Plan to Elevation view 1429 Program should cleanup temporary files on Documents and Settings folder on shut-down Repute 2.0 (Update 2) --------------------- Version 2.0.2.9111 Released 27/11/2009 Issues fixed (17 items): 1786 Tutorial4.rpx and associated files (Step2.rpx to Step6.rpx) contain invalid data 1782 '' appears twice in RPX file 1781 Increase maximum pile cap thickness to 5m 1780 Place 'Piles' group after 'Dimensions' in Property Inspector for pile groups 1779 Pile cap is not drawn on plan view 1776 Pile cap thickness reverts to 0.5m on reopening project 1775 Spelling mistake in welcome page ('... you can obtained this information ...') 1772 Show total elapsed time in PGroupN console window 1771 PGroupN displays elapsed time for each increments as ***** 1769 Shape and depth factors, etc., are missing from Property Inspector for bearing capacity algorithm 1766 Berezantzev's Nq value should not be calculated when phi > 40 degress or lambda is < 5 or > 25 1764 Trial edition of program expired on 2009-Nov-15 1762 Error "BearingCapacityFactors::Nq -1" when running default Longitudinal ULS calculation 1761 Change default position of water table to aid clarity on Drawing Board 1753 Cannot open file "C:\ProgramData\Geocentrix\Repute\MRU.ini" 1711 Hyperbolic torsion factor is not passed to boundary element engine 1639 Critical error when negative value entered into ready reckoner Repute 2.0 (Update 1) --------------------- Version 2.0.1.9101 Released 02/11/2009 Issues fixed (20 items): 1748 Incorrect error message when attempting to set pile group depth > 0 1737 X-axis labels of force and moment vs depth graphs do not indicate which variable is being plotted 1736 Welcome page should specifically mention Repute 2's version number 1734 Cannot plot stresses against the pile vs depth 1732 Workbook page 'Soils' contains no data and drop-down selector does not list 'Soils' 1729 'Custom Concrete' should be available in all editions of Repute 2 1728 Workbook does not indicate whether the pile stress has reached its limiting value (Boundary Element Analysis) 1724 Access violation in Geocentrix.dll running imported project from Repute 1.5 1722 Vertical force component changes direction when sign of horizontal component is changed 1721 Access violation attempting to run Longitudinal ULS calcuation on a pile group 1720 Error executing shell command. Error code = 5 1719 Intel Visual Fortran run-time error: forrtl: severe (59) 1718 Assertion failed in PileGroup.cpp when building pile group that contains only one pile 1717 Error occurred while reading data for 'BoundaryElementAnalysis' 1714 Items wrongly appear in 'Unavailable' panel using Enterprise Edition 1712 Rename 'Student' licence as 'Academic' 1709 Assertion failed: lhs && rhs in PileGroup.cpp when analysing single pile 1682 Base and shaft diameters are not equal after running Pile Group Wizard 1666 H-pile does not appear in 'Structural Elements' pane of Stockyard when running Enterprise Edition 1642 No warning given when deleting design standard if it is being used in a calculation Repute 2.0 (Update 0) --------------------- Version 2.0.0.9091 Released 30/09/2009 Issues fixed (39 items): 1706 Provide separate hyperbolic factor to control torsion in boundary element analysis 1705 Various algorithms (needed for Tutorial 3) are disabled in Trial Edition 1704 Square pile (needed for Tutorial 3) is disabled in Trial Edition 1703 Partial factors on resistance for ENV 1997-1 are wrong 1698 Repute 2 incorrectly uses most slender instead of least slender pile to determine number of pile elements in Boundary Element Analysis 1690 Access violation on re-running calculation following change in type from non-linear to linear 1689 No warning given on clicking validation button if no validation is specified 1686 No error message generated re stiffness parameters missing when running boundary element analysis 1680 Weight control does not allow units to be changed to MN/m3 or GN/m3 1679 Surcharges should not be visible in the Stockyard until they are fully implemented 1677 Error 'BearingCapacityAlgorithm::SetFactors' when selecting Spangler/Handy bearing capacity algorithm 1676 Error message 'CustomBearingCapacityFactors::SetNq' on entering negative value for Nq 1675 Help index is missing 1674 Pile Group Wizard should not be available in the Standard Edition 1672 Message box with '8.' as message appears when wall friction algorithm changed to API option 1671 Beta algorithm options are not implemeted properly 1668 Tab order of controls in Licence Registration box is wrong 1667 Splash screen shows at startup even when program option is set for it not to show 1665 Reference manual PDF is a copy of the Repute 1.0 User manual 1664 OK and Cancel keys do not work when pressed in Rename box 1662 Need to verify piles are not more closely spaced than 2.5 x diameter 1659 'Items.fr3' is out of date in release product 1658 Program description is out of date in Geocentrix CD Browser 1653 Broken link under Help group in Property Inspector 1640 Design standard EN1997-1 should allow model factor on resistance to be altered 1564 Help buttons in About and Program Options boxes display the wrong Help topic 1557 Nothing happens when large strain stiffness is missing from LE-PP boundary element analysis 1553 Access violation when editing pile diameter in Workbook 1552 Access violation when editing pile (x,y) coordinates in Workbook 1540 Insufficient significant figures in display of Ms for Fleming's Analysis 1525 Error when moving to new cell in Workbook after editing a value 1524 Program does not prevent an item being renamed with the same name as another item 1495 Borehole Wizard creates soils with default dry weight densities, sometimes larger than the entered wet weight density 1431 Verify that double-raked piles have the same angle of rake in XZ and YZ planes when subject to torsion 1424 Property Inspector displays stiffness values in inconvenient units (e.g. kPa) instead of GPa 1369 Shaft flexibility (Ms) appears as 0.0 when value entered is 0.0017 for Fleming's Hyperbolic Analysis 1368 Program incorrectly allows user to set soil's wet weight density less than dry weight density 1196 Repute icon is shown in reverse colour in About box 1193 Message box appears when H-pile with no section specified is added to construction stage, with message '[Geocentrix Error] Not specified' Program files in the latest build --------------------------------- Build number 17050 > indicates file has changed from the previous version ***Geocentrix executables*** > Repute2.exe (2.0.22) ***Geocentrix dynamic link libraries*** Actions.dll (1.1.0) Algorithms.dll (1.1.0) BearingCoefficients.dll (1.1.0) Boreholes.dll (3.1.0) ConvertPGN.dll (2.0.9) EarthCoefficients.dll (3.1.0) Engineering.dll (4.1.0) > Geocentrix.dll (4.3.4) Grounds.dll (3.1.0) Interfaces.dll (3.1.0) Materials.dll (4.1.0) Piles.dll (2.1.0) Platform.dll (4.3.1) Project.dll (4.1.0) Reports.dll (1.1.0) > Repute.dll (2.0.22) Repute1.dll (2.0.9) RexML.dll (1.1.0) RexUI.dll (1.1.1) Scenarios.dll (1.1.0) Sections.dll (1.1.0) Soils.dll (4.1.0) Standards.dll (3.1.0) Surcharges.dll (3.1.0) WaterTables.dll (4.1.0) ***Boost dynamic link libraries*** boost_date_time-bcb-mt-1_34_1.dll boost_program_options-bcb-mt-1_34_1.dll boost_signals-bcb-mt-1_34_1.dll boost_thread-bcb-mt-1_34_1.dll ***CodeGear dynamic link libraries*** borlndmm.dll (11.0.2902.10471) cc3280mt.dll (8.0.0.2) ***CodeGear packages*** bcbie100.bpl (11.0.2902.10471) dbrtl100.bpl (11.0.2902.10471) rtl100.bpl (11.0.2902.10471) vcl100.bpl (11.0.2902.10471) vcldb100.bpl (11.0.2902.10471) vcljpg100.bpl (11.0.2902.10471) vclx100.bpl (11.0.2902.10471) ***Developer Express packages*** ***all (2013.2.4)*** cxDataRS11.bpl cxEditorsRS11.bpl cxExportRS11.bpl cxGridRS11.bpl cxLibraryRS11.bpl cxPageControldxBarPopupMenuRS11.bpl cxPageControlRS11.bpl cxSpreadSheetRS11.bpl cxTreeListRS11.bpl cxVerticalGridRS11.bpl dxBarExtItemsRS11.bpl dxBarRS11.bpl dxComnRS11.bpl dxCoreRS11.bpl dxDockingRS11.bpl dxGDIPlusRS11.bpl dxLayoutControlRS11.bpl dxNavBarRS11.bpl dxPSCoreRS11.bpl dxPScxCommonRS11.bpl dxPScxExtCommonRS11.bpl dxPScxGridLnkRS11.bpl dxPScxPCProdRS11.bpl dxPScxTLLnkRS11.bpl dxPScxVGridLnkRS11.bpl dxPSdxLCLnkRS11.bpl dxPSLnksRS11.bpl dxPSPrVwAdvRS11.bpl dxPSPrVwRibbonRS11.bpl dxPSTeeChartRS11.bpl dxRibbonRS11.bpl dxRibbonCustomizationFormRS11.bpl dxServerModeRS11.bpl dxSkinOffice2007BlackRS11.bpl dxSkinOffice2007BlueRS11.bpl dxSkinOffice2007GreenRS11.bpl dxSkinOffice2007SilverRS11.bpl dxSkinsCoreRS11.bpl dxSkinscxPCPainterRS11.bpl dxSkinsdxBarPainterRS11.bpl dxSkinsdxDLPainterRS11.bpl dxSkinsdxNavBarPainterRS11.bpl dxSkinsdxRibbonPainterRS11.bpl dxThemeRS11.bpl ***FastReport packages*** ***all (4.14.1?)*** frx11.bpl fs11.bpl ***MJ Freelancing packages*** MJFAFSystemC11.bpl (3.6.0.11) ***OCXs*** hhctrl.ocx (5.2.3790.4110) ***Raize Software packages*** DM15_100.bpl (1.5.2.0) ***Sentinel dynamic link libraries*** hasp_windows_48297.dll (7.1.1.42508) ***Steema TeeChart packages*** ***all (9.0.7.121105)*** Tee911.bpl TeePro911.bpl TeeUI911.bpl TeeUser9.hlp (07/06/2007) ***other files*** nethasp.ini (19/04/2011) Repute2.exe.manifest (10/02/2006) Help\ Repute2.chm (22/09/2009) Manuals\ Repute 2 Quick-Start Guide.pdf (26/03/2014) Repute 2 Reference Manual.pdf (26/03/2014) Repute 2 User Manual.pdf (23/09/2009) Materials\ Concretes\ (all 22/06/2010) C8-10.xml C12-15.xml C16-20.xml C20-25.xml C25-30.xml C25.xml C30-37.xml C30.xml C35-45.xml C35.xml C40-50.xml C40.xml C45-55.xml C45.xml C50-60.xml C50.xml Steels\ (all 02/03/2009) Advance 275.xml Advance 355.xml S235.xml S275.xml S355.xml S450.xml Legacy\ (all 16/01/2009) 43.xml 50.xml 55.xml Fe360.xml Fe430.xml Fe510.xml Sheet piles\ (all 02/03/2009) S240GP.xml S270GP.xml S320GP.xml S355GP.xml S390GP.xml S430GP.xml Structural\ (all 02/03/2009) S235.xml S275.xml S355.xml S450.xml PGroupN\ (all 2.1.0.16010) PGroupN2.exe Projects\ Benchmarks\ (all 23/01/2014) RPT-001.rpx RPT-002.rpx RPT-003.rpx Examples\ (all 22/01/2014) Bond and Harris (2008) Ex 13.1.rpx Fleming (1992).rpx Fleming et al Chapter 4 Example 1 (1992).rpx Large circular group.rpx Randolph (1992).rpx Tomlinson (1994).rpx PGroup\ Problem1.pg (12/09/2002) PGroupN\ 2D-Linear.pgn (26/04/2002) etc... Repute 1 Tutorial 1\ (all 24/05/2004, except *) Step1.rpx Step2.rpx Step3.rpx Step4.rpx Step6.pgn* 11/01/2009 Step6.rpx Step6.xml* 11/01/2009 Tutorial 2\ (all 24/05/2004, except *) Step1.rpx Step2.rpx Step3.rpx Step4.rpx Step5.rpx Step8.pgn* 11/01/2009 Step8.rpx Step8.xml* 11/01/2009 Tutorial 3\ (all 24/05/2004, except *) Step1.rpx Step2.rpx Step3.rpx Step4.pgn* 11/01/2009 Step4.rpx Step4.xml* 11/01/2009 Tutorial1.rpx Templates\ (empty) Tutorial 1\ (all 21-22/01/2014) Step1.rpx Step2.rpx Step3.rpx Step4.rpx Step5.rpx Tutorial 1.rpx Tutorial 2\ (all 21-22/01/2014) Step1.rpx Step2.rpx Step3.rpx Step4.rpx Step5.rpx Step6.rpx Tutorial 2.rpx Tutorial 3\ (all 21-22/01/2014) Step1.rpx Step2.rpx Step3.rpx Step4.rpx Step5.rpx Step6.rpx Step7.rpx Step9.rpx Tutorial 3.rpx Tutorial 4\ (all 21-22/01/2014) Step1.rpx Step2.rpx Step3.rpx Step4.rpx Step5.rpx Step6.rpx Tutorial 4.rpx Tutorial 5\ (all 21-22/01/2014, except*) Step1.rpx Step2.rpx Step3.rpx Step4.rpx Step5.rpx Step6.rpx Tutorial 5.rpx Tutorial 5.xls* 29/10/2013 Tutorial 6\ (all 21-22/01/2014) Step1.rpx Step2.rpx Step3.rpx Step4.rpx Tutorial 4.rpx Tutorial 6.rpx Release Notes\ > Readme.rtf (06/06/2016) Repute2.0.0.txt (28/09/2009) Repute2.0.1.txt (02/11/2009) Repute2.0.2.txt (27/11/2009) Repute2.0.3.txt (10/01/2010) Repute2.0.4.txt (19/02/2010) Repute2.0.5.txt (30/03/2010) Repute2.0.6.txt (23/07/2010) Repute2.0.7.txt (04/11/2010) Repute2.0.8.txt (19/04/2011) Repute2.0.9.txt (04/11/2011) Repute2.0.10.txt (10/05/2012) Repute2.0.11.txt (18/09/2012) Repute2.0.12.txt (07/12/2012) Repute2.0.13.txt (02/04/2013) Repute2.0.14.txt (07/08/2013) Repute2.0.15.txt (23/01/2014) Repute2.0.16.txt (10/04/2014) Repute2.0.17.txt (17/04/2014) Repute2.0.18.txt (13/06/2014) Repute2.0.19.txt (21/01/2016) Repute2.0.20.txt (26/05/2016) Repute2.0.21.txt (06/06/2016) > Repute2.0.22.txt (31/05/2017) Reports\ Master.fr3 (10/02/2009) Report.html (31/07/2006) Report.xml (31/07/2006) Repute.fr3 (06/06/2016) Generated\ readme.txt (29/06/06) HTML\ (Include).xslt (all 30/07/2006, except *) Actions.xslt Algorithms.xslt All Items.xslt Calculations.xslt Design Standards.xslt Geometrical Objects.xslt Geotechnical Constituents.xslt Materials.xslt Project Information.xslt ReportNotAvailable.html* 27/06/2003 Scenarios.xslt Sections.xslt Structural Elements.xslt Icons\ (various) PGroupN\ PGroupN-Input.xslt Stylesheets\ Repute.css SVG\ SVG.xslt Welcome\ Atkins.gif (07/01/2011) Corus.gif (01/09/2009) Geocentrix.gif (10/05/2005) Geomarc.gif (28/11/2006) Repute.css (13/05/2005) Repute.gif (13/05/2005) Repute.html (05/01/2016) Stent.gif (07/01/2011) WordML\ (various) Sections\ Bearing Piles\ (all 29/08/2008) UKBP 203x203x 45.xml UKBP 203x203x 54.xml UKBP 254x254x 63.xml UKBP 254x254x 71.xml UKBP 254x254x 85.xml UKBP 305x305x 79.xml UKBP 305x305x 88.xml UKBP 305x305x 95.xml UKBP 305x305x110.xml UKBP 305x305x126.xml UKBP 305x305x149.xml UKBP 305x305x186.xml UKBP 305x305x223.xml UKBP 356x368x109.xml UKBP 356x368x133.xml UKBP 356x368x152.xml UKBP 356x368x174.xml ArcelorMittal\ (all 12/01/2016, except *) HZ 680M LT.xml HZ 880M A.xml HZ 880M B.xml HZ 880M C.xml HZ 1080M A.xml HZ 1080M B.xml HZ 1080M C.xml HZ 1080M D.xml HZ 1180M A.xml HZ 1180M B.xml HZ 1180M C.xml HZ 1180M D.xml HZ-M range* (20/01/2016) Summary table.xslt* (20/01/2016) Corus\ Advance\ (all 29/08/2008, except *) Summary table.xslt* 27/02/2009 UKBP 203x203x 45.xml UKBP 203x203x 54.xml UKBP 254x254x 63.xml UKBP 254x254x 71.xml UKBP 254x254x 85.xml UKBP 305x305x 79.xml UKBP 305x305x 88.xml UKBP 305x305x 95.xml UKBP 305x305x110.xml UKBP 305x305x126.xml UKBP 305x305x149.xml UKBP 305x305x186.xml UKBP 305x305x223.xml UKBP 356x368x109.xml UKBP 356x368x133.xml UKBP 356x368x152.xml UKBP 356x368x174.xml UKBP range* (27/02/2009) Legacy\ (all 05/01/2016, except *) Summary table.xslt* (27/02/2009) UKC 152x152x 23.xml UKC 152x152x 30.xml UKC 152x152x 37.xml UKC 203x203x 60.xml UKC 203x203x 71.xml UKC 203x203x 88.xml UKC 254x254x107.xml* 05/03/2009 UKC 254x254x132.xml* 05/03/2009 UKC 254x254x167.xml* 05/03/2009 UKC 305x305x137.xml* 05/03/2009 UKC 305x305x158.xml* 05/03/2009 UKC 305x305x198.xml* 05/03/2009 UKC 305x305x240.xml* 05/03/2009 UKC 305x305x283.xml* 05/03/2009 UKC 356x368x202.xml* 05/03/2009 UKC 356x406x235.xml* 05/03/2009 UKC 356x406x287.xml* 05/03/2009 UKC 356x406x340.xml* 05/03/2009 UKC 356x406x393.xml UKC 356x406x467.xml UKC 356x406x551.xml UKC 356x406x634.xml UKC range.xml* (27/02/2009) Pipes\ (all 17/12/2010, except *) Celcius 219.1 x 6.3.xml Celcius 219.1 x 8.0.xml Celcius 219.1 x 10.0.xml Celcius 219.1 x 12.5.xml Celcius 219.1 x 16.0.xml Celcius 244.5 x 12.5.xml Celcius 244.5 x 16.0.xml Celcius 273.0 x 10.0.xml Celcius 273.0 x 12.5.xml Celcius 273.0 x 16.0.xml Celcius 323.9 x 10.0.xml Celcius 323.9 x 12.5.xml Celcius 323.9 x 16.0.xml Celcius 355.6 x 16.0.xml Celcius 406.4 x 10.0.xml Celcius 406.4 x 16.0.xml Celcius 457.0 x 10.0.xml Celcius 457.0 x 16.0.xml Celcius 508.0 x 12.5.xml Celcius 508.0 x 16.0.xml Celcius 610.0 x 11.9.xml* (19/07/2011) NSP24 x 0.500.xml* (16/02/2010) NSP30 x 0.625.xml* (16/02/2010) NSP36 x 0.625.xml* (16/02/2010) NSP36 x 0.750.xml* (16/02/2010) NSP42 x 1.000.xml* (16/02/2010) Anon\ (all 16/12/2010, except *) NPS24 x 0.500.xml NPS30 x 0.562.xml NPS30 x 0.625.xml* (17/12/2010) NPS30 x 0.688.xml NPS30 x 0.750.xml NPS36 x 0.625.xml NPS36 x 0.688.xml NPS36 x 0.750.xml NPS36 x 0.875.xml NPS36 x 1.000.xml NPS36 x 1.250.xml NPS42 x 0.688.xml NPS42 x 0.750.xml NPS42 x 0.875.xml NPS42 x 1.000.xml NPS42 x 1.250.xml NPS42 x 1.500.xml NPS42 x 1.750.xml NPS42 x 2.000.xml NPS48 x 0.750.xml NPS48 x 0.875.xml NPS48 x 1.000.xml NPS48 x 1.250.xml NPS48 x 1.500.xml NPS48 x 1.750.xml NPS48 x 2.000.xml NPS48 x 2.250.xml NPS48 x 2.500.xml Pipe range.xml* (17/12/2010) Summary table.xslt* (16/02/2009) Corus\ (all 25-30/06/2010, except *) Celcius 21.3 x 3.2 Celcius 26.9 x 3.2 Celcius 33.7 x 3.2 Celcius 33.7 x 4.0 Celcius 42.4 x 3.2 Celcius 42.4 x 4.0 Celcius 48.3 x 3.2 Celcius 48.3 x 4.0 Celcius 48.3 x 5.0 Celcius 48.3 x 6.3 Celcius 48.3 x 5.6 Celcius 48.3 x 4.5 Celcius 48.3 x 3.6 Celcius 48.3 x 2.9 Celcius 48.3 x 2.6 Celcius 42.4 x 2.6 Celcius 42.4 x 2.9 Celcius 42.4 x 3.6 Celcius 42.4 x 4.5 Celcius 42.4 x 5.0 Celcius 21.3 x 2.6 Celcius 21.3 x 2.9 Celcius 26.9 x 2.6 Celcius 26.9 x 2.9 Celcius 26.9 x 3.6 Celcius 33.7 x 2.6 Celcius 33.7 x 2.9 Celcius 33.7 x 3.6 Celcius 33.7 x 4.5 Celcius 33.7 x 5.0 Celcius 60.3 x 2.6 Celcius 60.3 x 2.9 Celcius 60.3 x 3.2 Celcius 60.3 x 3.6 Celcius 60.3 x 4.0 Celcius 60.3 x 4.5 Celcius 60.3 x 5.0 Celcius 60.3 x 5.6 Celcius 60.3 x 6.3 Celcius 60.3 x 8.0 Celcius 76.1 x 2.9 Celcius 76.1 x 3.2 Celcius 76.1 x 3.6 Celcius 76.1 x 4.0 Celcius 76.1 x 4.5 Celcius 76.1 x 5.0 Celcius 76.1 x 5.6 Celcius 76.1 x 6.3 Celcius 76.1 x 8.0 Celcius 88.9 x 2.9 Celcius 88.9 x 3.2 Celcius 88.9 x 3.6 Celcius 88.9 x 4.0 Celcius 88.9 x 4.5 Celcius 88.9 x 5.0 Celcius 88.9 x 5.6 Celcius 88.9 x 6.3 Celcius 88.9 x 8.0 Celcius 88.9 x 10.0 Celcius 101.6 x 3.2 Celcius 101.6 x 3.6 Celcius 101.6 x 4.0 Celcius 101.6 x 4.5 Celcius 101.6 x 5.0 Celcius 101.6 x 5.6 Celcius 101.6 x 6.3 Celcius 101.6 x 8.0 Celcius 101.6 x 10.0 Celcius 114.3 x 3.2 Celcius 114.3 x 3.6 Celcius 114.3 x 4.0 Celcius 114.3 x 4.5 Celcius 114.3 x 5.0 Celcius 114.3 x 5.6 Celcius 114.3 x 6.3 Celcius 114.3 x 8.0 Celcius 114.3 x 10.0 Celcius 139.7 x 3.2 Celcius 139.7 x 3.6 Celcius 139.7 x 4.0 Celcius 139.7 x 4.5 Celcius 139.7 x 5.0 Celcius 139.7 x 5.6 Celcius 139.7 x 6.3 Celcius 139.7 x 8.0 Celcius 139.7 x 10.0 Celcius 139.7 x 12.5 Celcius 168.3 x 5.0 Celcius 168.3 x 5.6 Celcius 168.3 x 6.3 Celcius 168.3 x 8.0 Celcius 168.3 x 10.0 Celcius 168.3 x 12.5 Celcius 193.7 x 5.0 Celcius 193.7 x 5.6 Celcius 193.7 x 6.3 Celcius 193.7 x 8.0 Celcius 193.7 x 10.0 Celcius 193.7 x 12.5 Celcius 193.7 x 16.0 Celcius 219.1 x 4.5 Celcius 219.1 x 5.0 Celcius 219.1 x 5.6 Celcius 219.1 x 6.3 Celcius 219.1 x 8.0 Celcius 219.1 x 10.0 Celcius 219.1 x 12.5 Celcius 219.1 x 14.2 Celcius 219.1 x 16.0 Celcius 244.5 x 5.0 Celcius 244.5 x 5.6 Celcius 244.5 x 6.3 Celcius 244.5 x 8.0 Celcius 244.5 x 10.0 Celcius 244.5 x 12.5 Celcius 244.5 x 14.2 Celcius 244.5 x 16.0 Celcius 273.0 x 5.0 Celcius 273.0 x 5.6 Celcius 273.0 x 6.3 Celcius 273.0 x 8.0 Celcius 273.0 x 10.0 Celcius 273.0 x 12.5 Celcius 273.0 x 14.2 Celcius 273.0 x 16.0 Celcius 323.9 x 5.0 Celcius 323.9 x 5.6 Celcius 323.9 x 6.3 Celcius 323.9 x 8.0 Celcius 323.9 x 10.0 Celcius 323.9 x 12.5 Celcius 323.9 x 14.2 Celcius 323.9 x 16.0 Celcius 355.6 x 6.3 Celcius 355.6 x 8.0 Celcius 355.6 x 10.0 Celcius 355.6 x 12.5 Celcius 355.6 x 14.2 Celcius 355.6 x 16.0 Celcius 406.4 x 6.3 Celcius 406.4 x 8.0 Celcius 406.4 x 10.0 Celcius 406.4 x 12.5 Celcius 406.4 x 14.2 Celcius 406.4 x 16.0 Celcius 457.0 x 6.3 Celcius 457.0 x 8.0 Celcius 457.0 x 10.0 Celcius 457.0 x 12.5 Celcius 457.0 x 14.2 Celcius 457.0 x 16.0 Celcius 508.0 x 6.3 Celcius 508.0 x 8.0 Celcius 508.0 x 10.0 Celcius 508.0 x 12.5 Celcius 508.0 x 14.2 Celcius 508.0 x 16.0 Pipe range.xml* (28/06/2010) Summary table.xslt* (24/06/2010) Spun Piles\ Anon\ (all 08/10/2013, except *) Spun Pile 250.xml Spun Pile 300.xml Spun Pile 300A.xml* (07/10/2013) Spun Pile 300B.xml* (07/10/2013) Spun Pile 350.xml Spun Pile 400.xml Spun Pile 450.xml Spun Pile 500.xml Spun Pile 600.xml Spun Pile 700.xml Spun Pile 800.xml Spun Pile 900.xml Spun Pile 1000.xml Spun Pile 1200.xml ICP\ (all 08/12/2015, except *) ICP 80A400.xml ICP 80A500.xml ICP 80A600.xml ICP 80B400.xml ICP 80B500.xml ICP 80B600.xml ICP 80C400.xml ICP 80C500.xml ICP 80C600.xml ICP 80C1000.xml* (22/04/2015) ICP 90A400.xml ICP 90A500.xml ICP 90A600.xml ICP 90B400.xml ICP 90B500.xml ICP 90B600.xml ***Documents and Settings\All Users\Application Data\Geocentrix\Repute*** MRU.ini (29/10/2010) Repute2.cfg (01/11/2010) Repute2.lic (29/10/2010) Repute2.log (29/10/2010) ***Sentinel LDK/HASP GUI installer*** HASPUserSetup.exe (7.41.1.56613) FirmwareUpdate.exe (5.10.1.17134) ------------------------------- End of release notes -------------------------------